Fast Dry Paint
Type: one part
Shades: White and other bright shades
Gloss: 85 degrees at 60 °
Percent Pigment: 28-30%
Chemical composition: titanium dioxide (rutile)
Percentage: 70-72%
Percent solids weighed at 105 ° C: 60 ± 2%
Specific gravity at 25 ° C: 1.2-1.25 g / cubic centimeter
Viscosity at 25 ° C: 70-75 seconds with Ford Cap 4
Power coverage theory: 8-10 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Film thickness: 40-45 microns
Drying time: 5 minutes (in shiny color) at 25 ° C
Deep drying time: 4 hours at 25 ° C
Full hardness: 7 days at 25 ° C
Application Terms:
Spray-spray without air - Immersion
Minimum and maximum application temperature: 10-40 ° C
Maximum Moisture Usage: 75%
Storage conditions: 12 months in storage conditions at 20-25 ° C
Mechanical Factors:
Resistance to impact test (ASTM D 2734-69): Acceptable
Bending resistance in Mandrel Machine: Acceptable
Adhesion to surface: 4B
 Hardness: 2H ≈
Bending, in Mandrel Machine (ASTMD-1797): Acceptable
Chemical Resistance: Due to the use of the type of resin in this paint, the above color has a high resistance to wear, to gasoline and chain solvents. Also, its gloss and durability are remarkable in this color.
Conditions of application: The surface should be free of any fats and dust, if possible, phosphate level.
Dear consumer: Due to the fact that the formulation of this color has a wide range, so you can change your order and requirements. In other words, the above information is related to fast-drying glossy white color, and this information can be applied to matte and semi-opaque colors or can be applied on surfaces other than iron and steel as well as anticorrosion paint, primer application, etc. Pushed.