Epoxy Intermediate Paint
Epoxy Intermediate Paint
Type: two-part
Sham: according to order
Glossy: Semi Matte - Matte
Chemical composition of pigment and pigmentation: Titanium dioxide - Magnesium silicate - Zinc oxide - Barium sulfate and synthetic pigments
Chemical composition of the resin: its epoxy resin and a hardener of polyamino or polyaminoamide
Percent solid weight: at least 60% (3 hours at 105 ± 2 ° C)
Specific gravity at 25 ° C: 1.2-1.4 g / cubic centimeter
Viscosity of paint at 25 ° C: 100-120 seconds with Ford Cup 4 after mixing with Hardner
Minimum dry film thickness: 35-40 microns
Power coverage theory: 6-7 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Drying time: 2-3 hours at 25 ° C
Full hardness time: 7 days at 25 ° C
Minimum runtime execution time: 16 hours
Usable time after mixing: 6-8 hours
Usage: Normal spray - airless spray - brush
The following conditions apply: Use of epoxy primers as underlying coatings
Basic Features:
1 - Excellent chemical resistance against weak acids and weaknesses
2 - The second layer of coating suitable for various epoxy systems
3. Good resistance to fats
4. Resistant to medium to severe corrosive environments
Duration and storage conditions: 12 months in a cool, dry environment away from direct sunlight
Note: Dear customer, the above information can be changed based on your requirements and requirements. Information such as conditions of operation, atmospheric conditions, surface contamination, etc. can be useful in optimizing color formulation.
Type: two-part
Sham: according to order
Glossy: Semi Matte - Matte
Chemical composition of pigment and pigmentation: Titanium dioxide - Magnesium silicate - Zinc oxide - Barium sulfate and synthetic pigments
Chemical composition of the resin: its epoxy resin and a hardener of polyamino or polyaminoamide
Percent solid weight: at least 60% (3 hours at 105 ± 2 ° C)
Specific gravity at 25 ° C: 1.2-1.4 g / cubic centimeter
Viscosity of paint at 25 ° C: 100-120 seconds with Ford Cup 4 after mixing with Hardner
Minimum dry film thickness: 35-40 microns
Power coverage theory: 6-7 square meters per kilogram
Practical coverage strength: Depending on the loss factor
Drying time: 2-3 hours at 25 ° C
Full hardness time: 7 days at 25 ° C
Minimum runtime execution time: 16 hours
Usable time after mixing: 6-8 hours
Usage: Normal spray - airless spray - brush
The following conditions apply: Use of epoxy primers as underlying coatings
Basic Features:
1 - Excellent chemical resistance against weak acids and weaknesses
2 - The second layer of coating suitable for various epoxy systems
3. Good resistance to fats
4. Resistant to medium to severe corrosive environments
Duration and storage conditions: 12 months in a cool, dry environment away from direct sunlight
Note: Dear customer, the above information can be changed based on your requirements and requirements. Information such as conditions of operation, atmospheric conditions, surface contamination, etc. can be useful in optimizing color formulation.